NMB Minebea ARHT4E(R) Male Rod End Bearing – 1/4" Bore, 5/16" UNF Right Hand, PTFE Lined, Stainless Steel – Formula Car Suspension Links

The NMB Minebea ARHT4E(R) is a three-piece stainless steel male rod end with a 1/4" bore and 5/16"-24 UNF right hand thread. The body is heat-treated 17-4 PH stainless steel, running a heat-treated CRES 410 stainless race against a heat-treated CRES 440C stainless ball. The maintenance-free PTFE fabric liner is bonded directly to the race inner diameter rather than pressed in, so it holds zero play without greasing and will not migrate under load. Static radial capacity is 33,582 N. The heavy-duty ARHT series pairs a smaller bore with an oversized shank, so this carries a far higher static load than a 1/4" bore would normally suggest. It is the smallest rod end in the NMB range we stock, sized for suspension components and linkages that see loads in this range — fitting a larger rod end than the load calls for only adds weight. Supplied as a single rod end with lock nut.